Instead of manning up and admitting that a slush box is an auto trans and not a manual....BV will spend the rest of his life, all day, every day, right here at the NHB, playing word games ...Blackvegetable » 09 May 2025, 7:17 am » wrote: ↑ Why don't you man up and admit you **** up....because you're an idiot?
That's believable.
LMFAO!DeezerShoove » 08 May 2025, 5:56 pm » wrote: ↑ A couple of leaves and some dust ain't a problem. But...
"Working on a car" isn't what most people do in a parking lot.
He's obviously adjusting his headlights. In the sun. Without the lights on.
I do it all the time. The Allen wrench isn't visible.
And he probably already cut himself (with an Allen wrench) so he's holding pressure on it in his other hand.
You can't see it but he probably has an eyepatch too. **** tools are bad news, man!
you appear disgruntled...Blackvegetable » 09 May 2025, 5:42 am » wrote: ↑ You're a **** idiot.
Tim doesn't need to prove he is a man to fruit who worship a guy who
Spends more time on his hair and makeup than I spend forging this exquisite physique.
Lies about his weight.
And very likely cannot even drive.....a slush box.
It's all about convincing yourselves you are Men.
He's changing a headlight...Skans » 08 May 2025, 2:17 pm » wrote: ↑ I'm going to show you a picture of Tim Walz "working" on his car. For any of you real car guys, tell me what you see wrong with these photos. Before reading my comments below....
My comments:
- No one works on their car with a long sleeve button shirt and slacks.
- The car in the photo is some version of a Ford Escape. There isn't anything to work on the driver-side of the Escape where Timmy has his hand. Here's a more detailed shot of what's under the hood
- https://external-content.duckduckgo.com ... 8cb48bfWTF
- WTF is he working on WITHOUT TOOLS?
- WTF is he accessing without taking any of the engine covers off?
- Look at the crud accumulated in the corner of the cowl/hood vent. Also, the entire engine compartment is filthy. What a pig!
DeezerShoove » 09 May 2025, 6:37 am » wrote: ↑ Walz is a ***.
Kind of a bitter *** at that.
Ask me if those are my words... twat.
how far is that?DeezerShoove » 09 May 2025, 7:05 am » wrote: ↑ You have... ?!
Damning stuff. Well, I guess I'll go throw myself in front of a speeding train.
A plausible answer. Until you ask yourself "WHO was taking a picture of this....and WHY?"
Have you been sniffing my butt tampons again, Johnny? Do you want to? I mean, if you haven't, then how do you know they would be coated with orange diarrhea, which they most certainly are.JohnnyYou » 09 May 2025, 4:53 am » wrote: ↑ If Trump drove there would be a 47 mile back up before he got out of the White House lot. The freaking weave would destroy the highway system and all ground transportation would stop.
Wait for it.. Signs will be DOGED and people shouldn't need them if they get a Fully Self Driving Turdsla.
That said I hope Joe is really careful in that Corvette. He must be so angry he wants to drive it into the white house at 4,547 mph.
You certainly have no aversion to diversion @Skans . Did you know tampons also work as a butt plug to keep your orange diarrhea from getting all over everything?
710 cap - lol, I've never seen that before!murdock » 09 May 2025, 7:09 am » wrote: ↑ Perhaps he's looking for the dipstick, if it even has one. Or perhaps he's posing to anger conservatives. Or maybe he's eat up with a *******. Or he's looking for the 710 cap.
https://images.app.goo.gl/MLgh9q12c2p8nsL9A
wanted to google what my idea was before posting, how about a headlight bulb replacement? I am not defending the **** Walz, debunking your mentality adopted after birth.Skans » 08 May 2025, 2:17 pm » wrote: ↑ I'm going to show you a picture of Tim Walz "working" on his car. For any of you real car guys, tell me what you see wrong with these photos. Before reading my comments below....
My comments:
- No one works on their car with a long sleeve button shirt and slacks.
- The car in the photo is some version of a Ford Escape. There isn't anything to work on the driver-side of the Escape where Timmy has his hand. Here's a more detailed shot of what's under the hood
- https://external-content.duckduckgo.com ... 8cb48bfWTF
- WTF is he working on WITHOUT TOOLS?
- WTF is he accessing without taking any of the engine covers off?
- Look at the crud accumulated in the corner of the cowl/hood vent. Also, the entire engine compartment is filthy. What a pig!
No, he can't be replacing a bulb. If he is replacing a bulb, he's an idiot, because he isn't wearing rubber gloves.31stArrival » 09 May 2025, 8:36 am » wrote: ↑ wanted to google what my idea was before posting, how about a headlight bulb replacement? I am not defending the **** Walz, debunking your mentality adopted after birth.
Where do you come up with that insanity? Not everyone carries gloves around all the time. could be he has a package of wet wipes for his hands should something like that situation would occur.Skans » 09 May 2025, 8:38 am » wrote: ↑ No, he can't be replacing a bulb. If he is replacing a bulb, he's an idiot, because he isn't wearing rubber gloves.
Keep it controlled, Controlly...
Keep projecting life isn't self evident time adapting uniquely here while wannabe anything other than your time alive so far.
Anyone who has ever replaced headlight bulbs knows that you need to use a glove, or something completely clean (not wet wipes) to 1) get the bulb out of the package and 2) get it into the socket without touching it. Or, it will just burn out in short order.31stArrival » 09 May 2025, 8:47 am » wrote: ↑ Where do you come up with that insanity? Not everyone carries gloves around all the time.
You watch the View... and believe it.Blackvegetable » 09 May 2025, 5:08 am » wrote: ↑ Not here...ever..
You watch The Five....and believe it.
You're an idiot.
the other option is don't touch the glass of the lamp. paper towel keeps the oils of your hand off the bulb until set inside the headlight assembly. You are so lost without vocabulary defining how living needs to progress by social consensus or else society doesn't need anyone debunking reasonable doubt and every reality within this species dying to keep it going every generation gap forward(this includes my own ancestry, siblings, cousins, wife, etc.Skans » 09 May 2025, 8:52 am » wrote: ↑ Anyone who has ever replaced headlight bulbs knows that you need to use a glove, or something completely clean (not wet wipes) to 1) get the bulb out of the package and 2) get it into the socket without touching it. Or, it will just burn out in short order.
Also, anyone who has ever bought a headlight bulb from a Walmart or Autoparts store knows that they also sell latex gloves cheap . . . . if you don't already have them.
Now, I have changed a headlight bulb once without using rubber gloves. I used the auto parts store bag as a makeshift glove. Can be done, but not recommended.
He is using Lysol wipes to clean the area.Skans » 08 May 2025, 2:17 pm » wrote: ↑ I'm going to show you a picture of Tim Walz "working" on his car. For any of you real car guys, tell me what you see wrong with these photos. Before reading my comments below....
My comments:
- No one works on their car with a long sleeve button shirt and slacks.
- The car in the photo is some version of a Ford Escape. There isn't anything to work on the driver-side of the Escape where Timmy has his hand. Here's a more detailed shot of what's under the hood
- https://external-content.duckduckgo.com ... 8cb48bfWTF
- WTF is he working on WITHOUT TOOLS?
- WTF is he accessing without taking any of the engine covers off?
- Look at the crud accumulated in the corner of the cowl/hood vent. Also, the entire engine compartment is filthy. What a pig!