Child Groomer, Sexual Predator
59,315 posts
Huey » 16 Feb 2023, 8:57 am » wrote: ↑
@Blackvegetable
This source is completely wrong according to your theory of only one design:
https://www.gunbuilders.com/blog/ar15-v ... ifference/
I suggest reading the entire article. I already know what you are going to cherry pick.
To allow the auto sear to provide full-auto function, the M16's bolt carrier must be fabricated different from an AR-15's "commercial" bolt carrier group. The extra mass at the back of the carrier interacts with the sear and helps to reduce felt recoil during full-auto fire.
Shown with the safety lever removed, the AR-15's lower receiver (even if "mil-spec") does not have the necessary space to accept an M16's auto sear. The portion highlighted in red must be milled or cut to make room for the sear. Doing so is illegal, since machineguns cannot be manufactured without special licensing and case-by-case approval from the ATF.
Those are just two things. But the source is inaccurate because according to you there is only ONE DESIGN.
No, Tiny...
You have invented this condition.