User avatar
Huey
16 Feb 2023 8:24 am
User avatar
      
37,298 posts
Blackvegetable » 16 Feb 2023, 9:02 am » wrote: ↑
Huey » 16 Feb 2023, 8:57 am » wrote: ↑ @Blackvegetable  

This source is completely wrong according to your theory of only one design:

https://www.gunbuilders.com/blog/ar15-v ... ifference/

I suggest reading the entire article.  I already know what you are going to cherry pick.

Image

To allow the auto sear to provide full-auto function, the M16's bolt carrier must be fabricated different from an AR-15's "commercial" bolt carrier group. The extra mass at the back of the carrier interacts with the sear and helps to reduce felt recoil during full-auto fire.

Image

Shown with the safety lever removed, the AR-15's lower receiver (even if "mil-spec") does not have the necessary space to accept an M16's auto sear. The portion highlighted in red must be milled or cut to make room for the sear. Doing so is illegal, since machineguns cannot be manufactured without special licensing and case-by-case approval from the ATF.

Those are just two things.  But the source is inaccurate because according to you there is only ONE DESIGN.
No, Tiny...

You have invented this condition.
What condition have I invented.

The source is wrong, Kydex.  You are saying there is only one design meaning nothing has to be changed on the Sporter to drop in M 16 parts and make it full auto.  

Thank you for correcting me. 

@Selaphobia  
 
 
BV is in question time out indefinitely, until he takes the pledge to answer questions one for one.

The Pledge viewtopic.php?f=3&t=100927
Popular Vote Totals 2024 viewtopic.php?p=2685476#p2685476
BV's Sporter Losshttps: viewtopic.php?p=2610828#p2610828
BV 33 miles: viewtopic.php?p=2747521#p2747521
Sources viewtopic.php?p=2589152#p2589152
Updated 2 minutes ago
© 2012-2026 Liberal Forum

Search