*GHETTOBLASTER » 26 May 2025, 2:53 pm » wrote: ↑
A "kill command" hidden deep inside a CPU controlled piece of electronic equipment can be done/
You wouldn't want the gizmo to fail during the warranty period you have a "clock circuit" that is constantly running and programmed to make the equipment fail after X number of hours / months or years of operation.
My Jeep engine blew at 270,000 miles.
I brought the engine into my small town machine shop to have it rebuilt.
The Engine Guy said "Take a number because there are 2 other 4.0 liter Jeep engines waiting to rebuilt ahead of you".
He asked me what the symptoms were right before it blew and how many miles were on my engine.
I gave him those details and then he mentioned that the other 2 engines had the same mileage and the same problem. One of the pistons in each of these engines had a hole in it that was made by high pressure steam. The jet of steam was produced by a crack in the cylinder head water jacket.
What would make a water jacket crack on an engine that had never been badly over heated...?
.Momentarily lean out the fuel mixture by shortening the pulse width / duty cycle of that single cylinder's fuel injector nozzle.
Effectively that acts the same way as adding a shot of air when you are using a cutting torch.
So as a joke I told the mechanic that Chrysler might have put a "bug" into the CPU to have caused what looked like an impossible coincidence with these 3 Jeep engines.
We both kind of smiled at that idea.
Then guess what I found some years later while looking through a Jeep wiring diagram...?
The car's CPU does in fact have an internal "clock" .
All of my Jeep's injectors tested OK afterwards, so it's not as if one was clogged up
The sensors that control fuel curve enrichment were all OK too.
