Liberal Forum

Damn @Cannonpointer  


Look at who you are protecting you pedophile trafficking monster.

JohnnyYou » 14 Feb 2026, 8:17 pm » wrote: ↑

14 Feb 2026, 8:17 pm

Damn @Cannonpointer  

Look at who you are protecting you pedophile trafficking monster.

I spent the day putting the finishing touches on a solid oak stereo cabinet....AND WHAT YOU SEE ABOVE  IS TYPICAL FOR HOW POOR JOHNNY SPENT HIS DAY....  

Of course poor Johnny likes to think he was doing his best to "SAVE OUR DEMOCRACY" while he spent another day trying his best to MAKE AMERICA AFRICA AND MEXICO AGAIN....   
 

*GHETTOBLASTER » 14 Feb 2026, 9:41 pm » wrote: ↑

14 Feb 2026, 9:41 pm

I spent the day putting the finishing touches on a solid oak stereo cabinet....AND WHAT YOU SEE ABOVE  IS TYPICAL FOR HOW POOR JOHNNY SPENT HIS DAY....  

Of course poor Johnny likes to think he was doing his best to "SAVE OUR DEMOCRACY" while he spent another day trying his best to MAKE AMERICA AFRICA AND MEXICO AGAIN.... 

You are a pedo protector.  Your ignorance is astounding.
 
Why did Jeffery all of a sudden need 6 55 gallon drums of H2SO4 in 2018?  It was a one time order.

Muriatic Acid is preferred for pool cleaning.  Sulfuric Acid causes scaling.
 

*GHETTOBLASTER » 14 Feb 2026, 9:41 pm » wrote: ↑

14 Feb 2026, 9:41 pm

I spent the day putting the finishing touches on a solid oak stereo cabinet....AND WHAT YOU SEE ABOVE  IS TYPICAL FOR HOW POOR JOHNNY SPENT HIS DAY....  

Of course poor Johnny likes to think he was doing his best to "SAVE OUR DEMOCRACY" while he spent another day trying his best to MAKE AMERICA AFRICA AND MEXICO AGAIN.... 

did you make that stereo cabinet yourself?

nefarious101 » 15 Feb 2026, 2:31 pm » wrote: ↑

15 Feb 2026, 2:31 pm

did you make that stereo cabinet yourself?

Yep..!
6 foot long x 3 foot tall x 2 foot deep

3 sheets of 3/4" oak plywood.......$250

For the solid oak faceplate at the front of the box....

3 pieces of  3/4" x 2.5" wide  x 8 foot long .....$120    
2 pieces of  3/4" x  1.5" wide x 8 foot long.....$40

1 tube of wood dough....$10...!

Where the horizontal and vertical pieces of the faceplate intersect I used a router to make half lap joints.
Finished with clear Minwax satin polyurethane [what was left over from oak cabinets in a rental space I built a few years ago].
So over $400 for something you might find at the Goodwill or Facebook Marketplace for $100.........  


 

*GHETTOBLASTER » 15 Feb 2026, 3:11 pm » wrote: ↑

15 Feb 2026, 3:11 pm

Yep..!
6 foot long x 3 foot tall x 2 foot deep

3 sheets of 3/4" oak plywood.......$250

For the solid oak faceplate at the front of the box....

3 pieces of  3/4" x 2.5" wide  x 8 foot long .....$120    
2 pieces of  3/4" x  1.5" wide x 8 foot long.....$40

1 tube of wood dough....$10...!

Where the horizontal and vertical pieces of the faceplate intersect I used a router to make half lap joints.
Finished with clear Minwax satin polyurethane [what was left over from oak cabinets in a rental space I built a few years ago].
So over $400 for something you might find at the Goodwill or Facebook Marketplace for $100.........

good job masterblaster....

proud of ya!

Just picked up the Kregg 720Pro pocket hole jig and a Grizzly Biscuit cutter...been using dowels to join but youtube made this sound so good and easy

where do you get your plywood?

nefarious101 » 15 Feb 2026, 4:17 pm » wrote: ↑

15 Feb 2026, 4:17 pm

good job masterblaster....

proud of ya!

Just picked up the Kregg 720Pro pocket hole jig and a Grizzly Biscuit cutter...been using dowels to join but youtube made this sound so good and easy

where do you get your plywood?

You are moving up to Black Belt Cabinet Maker status with that stuff..!
I typically pilot drill for finish nails and rely on Titebond glue..[just like Fred Flintstone did his work].
Lowes was where I got the wood.
During Biden's tenure 3/4" oak ply was $90 per sheet so it was a nice surprise to see it for $75 last week.


 

*GHETTOBLASTER » 15 Feb 2026, 4:48 pm » wrote: ↑

15 Feb 2026, 4:48 pm

You are moving up to Black Belt Cabinet Maker status with that stuff..!
I typically pilot drill for finish nails and rely on Titebond glue..[just like Fred Flintstone did his work].
Lowes was where I got the wood.
During Biden's tenure 3/4" oak ply was $90 per sheet so it was a nice surprise to see it for $75 last week.

you sound like you know exactly what you are doing...

I saw where you should call local cabinet makers and either buy where they buy or source from them...usually cheaper and far better quality

they do it for a living and they need the best they can find

I usually buy at Lowes too

Got a new buddy who operates a couple of band saw mills....thinking about turning the kennels into a solar kiln

got some walnut there air drying he boarded up for me for $20 

nefarious101 » 15 Feb 2026, 6:03 pm » wrote: ↑

15 Feb 2026, 6:03 pm

you sound like you know exactly what you are doing...

I saw where you should call local cabinet makers and either buy where they buy or source from them...usually cheaper and far better quality

they do it for a living and they need the best they can find

I usually buy at Lowes too

Got a new buddy who operates a couple of band saw mills....thinking about turning the kennels into a solar kiln

got some walnut there air drying he boarded up for me for $20

When it comes to raised door / drawer fronts I think it makes good sense to order those through Lowes made to order. 
I draw the line at that level of difficulty and skill for me.
Otherwise plain and simple plywood overlay doors with beveled edges look OK out here in the middle of the woods.....  
Your buddy with the saw mill is a good friend to have..!
 

*GHETTOBLASTER » 15 Feb 2026, 6:49 pm » wrote: ↑

15 Feb 2026, 6:49 pm

When it comes to raised door / drawer fronts I think it makes good sense to order those through Lowes made to order. 
I draw the line at that level of difficulty and skill for me.
Otherwise plain and simple plywood overlay doors with beveled edges look OK out here in the middle of the woods.....  
Your buddy with the saw mill is a good friend to have..!

or get some cheap stock a burn it down until you and youtube can figure it out

yeah....he said he would get me a variety of wood just for hanging around...plus I can any of his staves I want to heat my shop free of charge

went over there the other day and he and his nephew had a side of beef hanging outside

nefarious101 » 15 Feb 2026, 8:03 pm » wrote: ↑

15 Feb 2026, 8:03 pm

or get some cheap stock a burn it down until you and youtube can figure it out

yeah....he said he would get me a variety of wood just for hanging around...plus I can any of his staves I want to heat my shop free of charge

went over there the other day and he and his nephew had a side of beef hanging outside

Is Sulfuric Acid used in wood rubbing?  You and Ghuttzno Ballsters might need to share 300 gallons.

JohnnyYou » 17 Feb 2026, 5:13 am » wrote: ↑

17 Feb 2026, 5:13 am

Is Sulfuric Acid used in wood rubbing?  You and Ghuttzno Ballsters might need to share 300 gallons.

Well DEI Johnny...it's like this...

To be a wood worker you have to be able to grab the bitches by the ****** like Trump does

Just walk up to a chick and say wanna "work the wood"​​​ and grab away

seriously....just try it...it works​​​​

Johnny You » 14 Feb 2026, 8:17 pm » wrote: ↑

14 Feb 2026, 8:17 pm

Damn @Cannonpointer  


Look at who you are protecting you pedophile trafficking monster.

You keep showing everyone specificity of existing in plain sight means nothing to you and everything hypothetical matters more.

Jeffery Dahlmar was an actual ancestor, the other was a fictional character. Are you sure it was sulfuric acid?

Jeffrey Dahmer used hydrochloric acid (also known as muriatic acid) in his crimes. He used it for two main purposes:

*31stArrival » 17 Feb 2026, 10:52 am » wrote: ↑

17 Feb 2026, 10:52 am

Jeffery Dahlmar was an actual ancestor, the other was a fictional character. Are you sure it was sulfuric acid?
Jeffrey Dahmer used hydrochloric acid (also known as muriatic acid) in his crimes. He used it for two main purposes:

Well Sole..  You win.. I stand corrected!

Jeffrey Dahmer used hydrochloric acid, which is also known as muriatic acid, to dispose of the remains of his victims. Police found several boxes of this acid in his apartment during his arrest on July 22, 1991, which he claimed to use for cleaning bricks. He did not use sulfuric acid. 

Also, I saw some photos in the files..  The concrete by the pool was covered with a bunch of  shyt black blotches of something..  Maybe Mold.


I sure as hell ain't gonna ask which one is better for the purpose... I am sure I would be taken in for questioning within hours.

YIKES!!!   which is more corrosive sulphuric acid or hydrochloric acid?

Sulfuric acid (
[img]data:image/gif;base64,R0lGODlhAQABAIAAAP///wAAACH5BAEAAAAALAAAAAABAAEAAAICRAEAOw==[/img]
) is generally more corrosive and dangerous than hydrochloric acid (
[img]data:image/gif;base64,R0lGODlhAQABAIAAAP///wAAACH5BAEAAAAALAAAAAABAAEAAAICRAEAOw==[/img]
), particularly in concentrated form, because it acts as a powerful dehydrating and oxidizing agent. While both are strong acids, sulfuric acid's ability to destroy organic tissue (carbonization) and higher molarity (
[img]data:image/gif;base64,R0lGODlhAQABAIAAAP///wAAACH5BAEAAAAALAAAAAABAAEAAAICRAEAOw==[/img]
 vs 
[img]data:image/gif;base64,R0lGODlhAQABAIAAAP///wAAACH5BAEAAAAALAAAAAABAAEAAAICRAEAOw==[/img]
 for HCl) makes it more destructive. 
Key Differences in Corrosiveness:

• Action on Tissue/Materials: Concentrated sulfuric acid removes water from materials, causing intense charring and severe burns, whereas HCl primarily causes acid burns.
• Oxidizing Power: Sulfuric acid is a strong oxidizing agent, allowing it to corrode a wider range of metals, including steel, more aggressively than HCl.
• Volatility: HCl is volatile and releases fumes that can cause respiratory damage, but concentrated sulfuric acid has low volatility and is less likely to escape into the air, making it more dangerous if it directly contacts skin or materials.
• Concentration: Commercially, concentrated sulfuric acid is 
  [img]data:image/gif;base64,R0lGODlhAQABAIAAAP///wAAACH5BAEAAAAALAAAAAABAAEAAAICRAEAOw==[/img]
   pure, while concentrated hydrochloric acid is only 
  [img]data:image/gif;base64,R0lGODlhAQABAIAAAP///wAAACH5BAEAAAAALAAAAAABAAEAAAICRAEAOw==[/img]
   (the rest is water). 

While hydrochloric acid is slightly more acidic in dilute, aqueous solutions due to complete dissociation, sulfuric acid's secondary properties make it far more corrosive to steel and human tissue. 
 
 
 

Johnny You » 17 Feb 2026, 10:57 am » wrote: ↑

17 Feb 2026, 10:57 am

Well Sole..  You win.. I stand corrected!

Jeffrey Dahmer used hydrochloric acid, which is also known as muriatic acid, to dispose of the remains of his victims. Police found several boxes of this acid in his apartment during his arrest on July 22, 1991, which he claimed to use for cleaning bricks. He did not use sulfuric acid. 

Also, I saw some photos in the files..  The concrete by the pool was covered with a bunch of  shyt black blotches of something..  Maybe Mold.


I sure as hell ain't gonna ask which one is better for the purpose... I am sure I would be taken in for questioning within hours.

Look at you trying to save your career social identity. See I wasn't coming after you personally, just the methods you use to think you out smarted everyone serving humanity while making sure nobody corrects the corruption established so far..